Covestro and Fraunhofer UMSICHT Launch CARBEX Project to Transform End-of-Life Vehicle Waste into Valuable Chemicals
Covestro and Fraunhofer UMSICHT Launch CARBEX Project to Transform End-of-Life Vehicle Waste into Valuable Chemicals
Joint research initiative aims to recover benzene, toluene and other essential aromatics from automotive shredder residue, advancing circularity and reducing carbon emissions in chemical production.
Covestro, the Fraunhofer Institute for Environmental, Safety and Energy Technology UMSICHT, and Carbon Minds GmbH have joined forces to develop a new recycling pathway that could transform automotive waste into valuable chemical raw materials. Through the newly launched CARBEX research project, the partners aim to validate an innovative process for recovering essential aromatic compounds from automotive shredder residue (ASR), a complex waste stream generated during vehicle recycling that is still largely used for energy recovery or incinerated.
The initiative focuses on recovering benzene, toluene, ethylbenzene and xylenes, collectively known as BTEX aromatics. These compounds are among the most important basic chemicals used across the global chemical and plastics industries. By extracting them from end-of-life vehicle waste, CARBEX aims to establish an alternative source of raw materials, reduce dependence on fossil-based feedstocks and create new opportunities for closing material loops in the automotive value chain.
Covestro is leading the project’s industrial activities, while Fraunhofer UMSICHT is responsible for developing and scaling the underlying recycling technology. Carbon Minds GmbH will independently evaluate the environmental performance of the proposed process through a life cycle assessment.
Recovering valuable chemical building blocks from automotive waste
BTEX aromatics play a fundamental role in the production of numerous industrial materials, including polymers, plastics, coatings and polyurethane-based products. For Covestro, benzene and toluene are particularly important feedstocks for manufacturing two major isocyanates: methylene diphenyl diisocyanate (MDI) and toluene diisocyanate (TDI).
MDI is widely used in the production of rigid polyurethane foams for building insulation and refrigeration equipment, as well as structural and acoustic components for the automotive sector. TDI, meanwhile, is a key ingredient in flexible polyurethane foams used in mattresses, upholstered furniture, vehicle seating and other cushioning applications.
At the end of their useful life, vehicles containing these polyurethane-based components enter automotive recycling facilities. Following dismantling and metal recovery, the remaining mixed materials are processed into automotive shredder residue. This complex waste stream contains plastics, rubber, textiles, polyurethane, coatings and other materials that are difficult to separate using conventional recycling methods.
Consequently, a considerable proportion of its material value remains underutilised.
CARBEX seeks to address this challenge by recovering chemical building blocks from the residue rather than treating it primarily as a source of energy.
“With CARBEX, we are tapping into a source of carbon that is currently mostly burned,” says Dr. Stefanie Eiden, Project Manager at Covestro. “If we can recover benzene and toluene from automotive shredder residue at the quality required for our MDI and TDI production processes, we can close a material loop while replacing an emissions-intensive step in the production of basic chemicals.”
Reducing dependence on fossil-based raw materials
Today, aromatic compounds are predominantly manufactured through petrochemical processes, particularly the steam cracking of fossil-based naphtha. This conventional production route is associated with considerable greenhouse gas emissions, both from industrial processing and upstream activities such as crude oil extraction and naphtha production.
In Germany, steam cracking generates approximately 8 million metric tons of CO₂-equivalent emissions annually through direct process emissions. A further estimated 11 million metric tons are associated with crude oil extraction and naphtha production.
At the same time, Germany generates more than 466,000 metric tons of automotive shredder residue every year. Approximately 210,000 metric tons are currently directed towards energy recovery or disposal. Polyurethane accounts for an average of around 20% of the residue by weight, although the proportion varies depending on the composition and origin of the waste.
This represents a considerable opportunity to recover carbon-containing materials that would otherwise be lost through conventional waste treatment.
By converting ASR into BTEX-rich pyrolysis oil, CARBEX could provide the chemical industry with an additional feedstock source while reducing the environmental footprint associated with conventional aromatic production.
Pyromat technology uses pyrolysis coke as an internal catalyst
The CARBEX project builds on Fraunhofer UMSICHT’s patented Pyromat technology, which combines pyrolysis with a subsequent autocatalytic reforming process.
The technology is designed to process complex and contaminated waste streams without relying on expensive external catalysts. Instead, it uses the pyrolysis coke generated during the recycling process itself as both a catalyst and an adsorbent.
During pyrolysis, organic materials are thermally decomposed at temperatures of approximately 500°C in an oxygen-deficient environment. The resulting products include gases, liquid pyrolysis oil and solid carbon-rich residue, commonly referred to as pyrolysis coke.
In the Pyromat process, naturally occurring components within the coke, including calcium carbonate, titanium dioxide and copper, contribute to the formation of aromatic compounds during subsequent processing. At the same time, the material helps capture halogens such as chlorine and bromine, limiting their transfer into the pyrolysis oil.
This is particularly important when processing automotive shredder residue, which can contain significant quantities of contaminants. Halogens in recycled feedstocks can create difficulties for downstream chemical processing and potentially affect the quality of the recovered products.
The integrated catalytic and adsorption approach is intended to improve process stability, reduce the need for additional treatment stages and make the technology more suitable for heterogeneous industrial waste streams.
Promising results from preliminary laboratory tests
Initial laboratory-scale experiments conducted by Fraunhofer UMSICHT have demonstrated encouraging results.
Using automotive shredder residue as feedstock, the institute achieved a BTEX concentration of 62% by weight in the resulting pyrolysis oil. This represents an increase of approximately 60% compared with conventional pyrolysis oils. The experiments also achieved a reduction in halogen content of up to 99%.
According to the institute’s calculations, process-related emissions from the Pyromat technology amount to approximately 1.1 metric tons of CO₂-equivalent per metric ton of BTEX produced. This compares with an estimated 1.6–1.8 metric tons of CO₂-equivalent associated with conventional steam cracking.
These preliminary findings indicate the potential of the technology to improve resource efficiency while reducing the carbon intensity of aromatic production. However, further pilot-scale testing and industrial validation will be necessary to establish its commercial viability and consistent product quality.
“The Pyromat technology uses pyrolysis coke as both a catalyst and an adsorbent. This makes the process robust and cost-effective, especially when dealing with highly contaminated waste streams,” explains Dr. Thomas Fehn, Project Manager at Fraunhofer UMSICHT’s Sulzbach-Rosenberg branch.
“As part of the project, we are taking this approach from the laboratory to continuous pilot-scale operation at a throughput of 10 kilograms per hour.”
According to market studies referenced by the project partners, widespread industrial adoption could potentially reduce Germany’s annual CO₂-equivalent emissions by up to 640,000 metric tons.
From laboratory research to industrial-scale chemical production
A major objective of CARBEX is to demonstrate the technical feasibility of the complete recycling value chain, extending from automotive waste processing to the recovery and industrial application of individual aromatic compounds.
Fraunhofer UMSICHT will adapt its existing pyrolysis infrastructure to support continuous pilot-scale operation. This involves converting a fixed-bed reactor into a moving-bed reactor and identifying stable operating conditions for processing automotive shredder residue.
The pilot plant is expected to operate at a throughput of approximately 10 kilograms per hour. One of the key project milestones is the production of at least 50 kilograms of BTEX-rich pyrolysis oil with a halogen concentration below 30 parts per million (ppm).
Meeting this quality threshold is essential for enabling further processing in large-scale industrial chemical facilities, where contaminants can interfere with downstream operations and product specifications.
Covestro will focus on developing a model-based separation process to extract individual aromatic compounds, particularly benzene and toluene, from the resulting pyrolysis oil.
The separation process will use distillation to isolate the target chemicals and assess their suitability as feedstocks for existing MDI and TDI production processes. This stage is critical because recovered chemicals must meet stringent industrial quality requirements before they can be introduced into established manufacturing operations.
In addition to technical validation, Covestro will conduct a techno-economic assessment to evaluate the potential costs, process efficiency and scalability of the proposed value chain.
Carbon Minds GmbH will undertake an independent, ISO-compliant cradle-to-gate life cycle assessment (LCA). The assessment will examine the environmental impacts associated with the new recycling route, including feedstock sourcing, processing, energy consumption and the production of recovered aromatic compounds.
Industry partners contribute expertise in process engineering and distillation
The CARBEX consortium also includes two associated industrial partners whose expertise will support the development and potential commercialisation of the technology.
Becklönne Maschinenbau GmbH & Co. KG will contribute its experience in the engineering and construction of thermochemical pilot plants, particularly in process development and equipment scale-up.
Rain Carbon bv will provide expertise in large-scale distillation, aromatic processing and marketing. Its participation is expected to support the development of downstream processing strategies and help evaluate how recovered aromatics could be integrated into established industrial supply chains.
By combining research expertise, industrial engineering capabilities and chemical processing knowledge, the consortium intends to address the technical and commercial challenges involved in transforming heterogeneous automotive waste into industrial-grade chemical feedstocks.
Following the completion of the research project, the partners intend to use the results as a foundation for designing a demonstration plant targeting Technology Readiness Level (TRL) 7, which represents a system prototype demonstrated in an operational environment.
Supporting automotive circularity and emerging recycling regulations
Beyond the potential environmental benefits, CARBEX could contribute to the automotive industry’s transition towards more circular material management.
The European Union is strengthening its regulatory framework for end-of-life vehicle management, with increasing emphasis on recycling, material recovery and the use of recycled content in new vehicles.
The proposed EU End-of-Life Vehicles Regulation (ELVR) includes provisions for mandatory recycled-plastic content in vehicles, with requirements expected to apply from 2032, subject to the final regulatory framework and its implementation.
Such measures are expected to increase demand for reliable recycling technologies capable of recovering materials from end-of-life vehicles and returning them to manufacturing supply chains.
Chemical recycling could play an important complementary role alongside mechanical recycling, particularly for mixed, contaminated or complex waste streams that are difficult to process through conventional methods.
Through CARBEX, polyurethane-containing automotive waste could potentially become a source of recovered aromatic feedstocks, enabling the carbon contained in end-of-life materials to re-enter chemical manufacturing.
The economic opportunity is also significant. Industry analyses indicate that Germany produces more than 2.6 million metric tons of aromatics annually, representing a market value of approximately €1.95 billion. Developing alternative feedstock sources could therefore create new opportunities for chemical producers while supporting the transition towards lower-carbon industrial production.
Advancing the circular chemical economy
The CARBEX research project is scheduled to run from September 2026 to August 2029 and is funded by the German Federal Ministry of Research, Technology and Space under its Avoiding Climate-Relevant Process Emissions in Industry (KlimPro-Industrie II) funding programme.
By combining advanced pyrolysis, autocatalytic reforming, chemical separation and life cycle assessment, the initiative seeks to demonstrate how difficult-to-recycle automotive waste can be converted into valuable raw materials for the chemical industry.
Although the technology still requires pilot-scale validation and further assessment before commercial deployment, its potential extends beyond automotive recycling. If successfully scaled, the approach could provide an additional pathway for recovering valuable chemical building blocks from complex waste streams, reducing reliance on fossil resources and supporting more circular industrial value chains.
For Covestro and its research partners, CARBEX represents a step towards connecting automotive recycling with chemical manufacturing, turning end-of-life materials into potential feedstocks for the next generation of industrial products.
#Covestro #FraunhoferUMSICHT #CARBEX #ChemicalRecycling #AutomotiveRecycling #CircularEconomy #Polyurethane #SustainableChemistry #BTEX #PlasticRecycling #WasteToValue #Decarbonisation #ChemicalIndustry #Sustainability